Products

The FY-QB-08 pipeline ring seam welding machine is fixed with atube, and the welding car crawling inde-pendently to achieve the pipeline welding. The welding process uses high-efficiency, low cost Co2 gas protection welding (GMAw), and welding wire optional refreshment wire or drug cores Welding wire, the entire welding is more rational, and the operation is more humane.Ads to the pipeline by magnetic force, and automatically craw-lalong the welding channel during welding. It is very convenient to install, use and remove quickly. The welding of stainless steel or pipes that cannot be magnetically adsorbed requires another track, and the track specifi- cations are customized according to the need for welding.

FY-QB-06- I is a welding equipment that uses a rack and pinion drive to travel on track. It is widely used in horizontal butt welding and vertical butt welding, and is especially suitable for medium and thick plate welding. By adjusting the position and angle of the welding gun, fillet welding, horizontal welding and over head welding can also be performed. The trolley body,swing device and control panel are integrated into one, and can be welded while walking on the track. The track is attracted to the work piece with powerful magnets, making it easy to install and disassemble.

The FY-QB-06 is a horizontal orbital welding equipment using gearshift drive. By adjusting the welding fixture and angle, othermethods can also be welded in other ways, such as horizontalwelding and vertical welding. The car walking body and thecontrol panel are integrat-ed into one, which can be welded onthe track. The track is sucked on the workpiece with magnets.and it is conve-nient to install and disassemble. Small size, lightweight, very convenient to move and use. The track can beex-tended infinitely.

1. This welding car is a multi -function welding machine that should be welded in the plane corner, vertical angle welding, flat docking standing docking and supers truc- ture. 2. The swing speed, swing range, center position, and left and right stays can be adjusted, suitable for various specifications of welding channels. 3.Small volume, light weight, convenient installation, non -skilled workers can also be welded. 4. Install a permanent magnet. Welding lines can be avoided when welding. 5.Configure soft and hard orbit can satisfy vertical walking, side -in -side walking, curved walking and welding.

1.FY-8SSWT-H side suction hanging automatic welding trolley. 2. The swing speed, swing amplitude, center position and left and right dwell time can be adjusted to suit vari-ous specifications of welds. 3. Installed with permanent strong magnets to prevent the trolley from falling off during welding. 4. The walking surface height meets 12oMM and can work normally. lt is suitable for welding l-beam, T-beam and H-beam.

1. FY-4B is a side suction horizontal angle welding automatic device. 2.Equipped with permanent strong magnets to prevent the car from falling off during welding. 3.Suitable for corner welding ofl-beams, T-shaped parts, or 7-shaped parts, it has a small volume, light weight, no track and is easy to move. In addition, it can move on in- clined surfaces and narrow spaces. 4. The driving wheel itself is designed to face the welding area, and the bottom of the car is equipped with a friction limit wheel, which can better ensure that the car moves along the welding line. The side suction installation method is suitable for certain spe-cial welding forms.

1. The FY-8SSB car is a welded automatic device suitable for intermittent or continuous horizontal welding structure. 2. The actual distance display of the welding/non -welding interval,adjust the distance between the switch to the up and down, set the distance between the welding and non -welding, the distance between the welding and the non -welding is controlled by the motorand the controller. The size of the size is high., Run evenly, can achieve precision welding. The car walking speed in non -welding state is maximum (99omm/min).★ Note: The self-protection circuit switch of the welded machine when setting and welding must be closed .–OFF. 3. There is a arc collection device, the adjustment range of the collection time is 0-5s. 4. Install a permanent magnet to avoid the phenomenon of the car from getting out of the welding line.

1. FY-6SS-II is a single-sided double-gun horizontal fillet weldingautomatic device. 2. Two welding guns are installed at a certain distance,with thefunction of welding gun selection, which can beused for single-gunwelding or dual-gun welding at the same time. when welding thickworkpieces, dual-gun welding is selected at the same time, which isefficient and economical, and workers can operate multiple de-vices atthe same time. 3.A guide mechanism is installed to avoid the welding gun andwelding line from separating during welding. 4.Easy to move and operate, even unskilled workers can operate it.

(1)One machine holds two welding guns and performs double.sided fillet welding in one pass (2)with limit stop function, multiple units can be oper-atedsimultaneously (3)Suitable for welding l-beams, stiffener plates, and T-beam work pieces (4)when welding on both sides simultaneously, defor-mationca used by general single-sided welding can be avoided. (5)Easy to move and operate, even unskilled workers can perform welding

1. FY-8ssw is a swing type automatic welding device,which issuitable for welding various fillet welds. A wider weld can beobtained in one welding. 2.The swing speed, swing amplitude, center position and left andright dwell time can be adjusted to suit vari-ous specifications ofwelds. 3.Small size, light weight, easy to install and move, even unskilledworkers can perform welding.4.Permanent magnets are installed to avoid welding linedetachment during welding.  

1)The FY-6S car is an automatic welding device suitable forhorizontal angle welding. 2)Welding in the left and right directions can be achieved. The ends of the car are installed with a sense of stop switch. After the welding is over, the car can be automatically stopped, which is convenient for one worker to manipulate multiple equipment at the same time. 3)Small volume, light weight, and convenient movement and installation. Non -skilled workers can also be welded. 4)Install a permanent magnet to avoid the phenomenon of the carfrom getting out of the welding line.5)Welded on the vertical surface