عربة لحام لجميع المواضع
01
FY-QB-MG-500 All-position pipe welding machine
2024-12-20
The pipe fixation and welded car walk through the way to achieve automatic welding (5G welding) in the pipeline. The welding process uses high -efficiency, low -cost carbon dioxide
gas or hybrid gas protection (80%milogenic+20%carbon dioxide).
Advantages of full -position pipeline welding: wireless remote control, program can be preset or at any time, the welding parameters can be set at any time, and the parameters are
stored for later calls. Automatically identify the welding position during welding. The equipment itself has a orientation sensor, which can automatically identify the welding angle. The
machine can match the appropriate current voltage and walk or swing parameters according to different positions at 1 and 12 points. easy to use.
1. Applicable work conditions: various long -volume pipelines, thermal pipelines, buried land pipes or craft pipelines and other on -site welding ports.
2. Welding material: carbon steel, stainless steel, alloy steel, low -temperature steel, إلخ.
3.Applicable welds: Pipe diameter can be more than 15o mm or more, and the wall thickness is greater than 5 mm. It can be applicable. Thick wall tube can use multi -layer and multi
-channel welding.
4. Welded car: The design is light and easy to carry, and the permanent magnet adsorption is especially suitable for welding the entire pipeline at the construction site.
5. Wireless remote control: Wireless remote control preset welding parameters. In the welding work, it can be fine -tuned in real time according to the working conditions. The operation is simple and the labor intensity is low.
6. Welding efficiency: Fast speed, high production efficiency, and handmade arc welding can be increased by about 3-4 times.
view
detail
01
FY-QWZ1 all-position automatic welding machine
2024-12-20
1. This welding car is a multi -function welding machine that should be welded in the plane corner, vertical angle welding, flat docking standing docking and supers truc- ture.
2. سرعة التأرجح, swing range, center position, and left and right stays can be adjusted, suitable for various specifications of welding channels.
3.Small volume, خفيفة الوزن, convenient installation, non -skilled workers can also be welded.
4. Install a permanent magnet. Welding lines can be avoided when welding.
5.Configure soft and hard orbit can satisfy vertical walking, side -in -side walking, curved walking and welding.
view
detail
01
جرار لحام فيليه مزدوج البندقية FY-6SS-II
2024-12-20
1. FY-6SS-II عبارة عن جهاز آلي لحام شرائح أفقي مزدوج الجانب.
2. يتم تثبيت مسدسي لحام على مسافة معينة,مع وظيفة اختيار بندقية اللحام, والتي يمكن استخدامها للحام بمسدس واحد أو لحام بمسدس مزدوج في نفس الوقت.
عند لحام قطع العمل السميكة, يتم اختيار اللحام المزدوج في نفس الوقت, وهو فعال واقتصادي, ويمكن للعمال تشغيل أجهزة متعددة في نفس الوقت.
3.تم تركيب آلية توجيه لتجنب فصل مسدس اللحام وخط اللحام أثناء اللحام.
4.سهل الحركة والتشغيل, حتى العمال غير المهرة يمكنهم تشغيلها.
view
detail
01
ماكينة لحام أوتوماتيكية FY-8sS-II على الوجهين
2024-12-20
(1)تحتوي الآلة الواحدة على مسدسي لحام وتقوم بإجراء لحام شرائح على الوجهين في تمريرة واحدة
(2)مع وظيفة توقف الحد, يمكن تشغيل وحدات متعددة في وقت واحد
(3)مناسبة لحام الحزم L, لوحات تقوية, وقطع عمل T-beam
(4)عند اللحام على كلا الجانبين في وقت واحد, يمكن تجنب التشوه الذي يستخدمه اللحام العام من جانب واحد.
(5)سهل الحركة والتشغيل, حتى العمال غير المهرة يمكنهم أداء اللحام
view
detail
01
FY-8SSw Horizontal Oscillating Fillet Welding Machine
2024-12-20
1. FY-8ssw is a swing type automatic welding device,which issuitable for welding various fillet welds. A wider weld can beobtained in one welding.
2.سرعة التأرجح, سعة التأرجح, center position and left andright dwell time can be adjusted to suit vari-ous specifications ofwelds.
3.حجم صغير, خفيفة الوزن, easy to install and move, even unskilledworkers can perform welding.4.Permanent magnets are installed to avoid welding linedetachment during welding.
view
detail
01
FY-6S Fillet welding tractor
2024-12-20
1)The FY-6S car is an automatic welding device suitable forhorizontal angle welding.
2)Welding in the left and right directions can be
achieved. The ends of the car are installed with a sense of stop switch. After the welding is over, the car can be automatically stopped, which is convenient for one worker to manipulate multiple equipment at the same time.
3)Small volume, خفيفة الوزن, and convenient movement and installation. Non -skilled workers can also be welded.
4)Install a permanent magnet to avoid the phenomenon of the carfrom getting out of the welding line.5)Welded on the vertical surface
view
detail