Straight track welding trolley

The unique riding clamping method is particularly suitable for welding with narrow gaps and low work piece heights, such as shipbuilding hatch cover sliding tracks, blockingiron and other low standing plates, small-sized ball flat steel, etc. Double gun simultaneous welding, with built-in intermittent welding program, can choose continuous or in- termittent welding. when the height of the work piece is greater than 4O mm, it can be mounted and stably moved for welding. It can handle various materials such as flat steel, square steel, ball flat steel, T-shaped profiles, L-shaped steel, etc. Support quick clamping operation and elastic adjustment of clamping force.

FY-QB-06- I is a welding equipment that uses a rack and pinion drive to travel on track. It is widely used in horizontal butt welding and vertical butt welding, and is especially suitable for medium and thick plate welding. By adjusting the position and angle of the welding gun, fillet welding, horizontal welding and over head welding can also be performed. The trolley body,swing device and control panel are integrated into one, and can be welded while walking on the track. The track is attracted to the work piece with powerful magnets, making it easy to install and disassemble.

The FY-QB-06 is a horizontal orbital welding equipment using gearshift drive. By adjusting the welding fixture and angle, othermethods can also be welded in other ways, such as horizontalwelding and vertical welding. The car walking body and thecontrol panel are integrat-ed into one, which can be welded onthe track. The track is sucked on the workpiece with magnets.and it is conve-nient to install and disassemble. Small size, lightweight, very convenient to move and use. The track can beex-tended infinitely.

1. The FY-8SSB car is a welded automatic device suitable for intermittent or continuous horizontal welding structure. 2. The actual distance display of the welding/non -welding interval,adjust the distance between the switch to the up and down, set the distance between the welding and non -welding, the distance between the welding and the non -welding is controlled by the motorand the controller. The size of the size is high., Run evenly, can achieve precision welding. The car walking speed in non -welding state is maximum (99omm/min).★ Note: The self-protection circuit switch of the welded machine when setting and welding must be closed .–OFF. 3. There is a arc collection device, the adjustment range of the collection time is 0-5s. 4. Install a permanent magnet to avoid the phenomenon of the car from getting out of the welding line.